Polyurethane and Other High Viscosity Medium Measurement Capacitive Liquid Level Sensor

Short Description:

-All metal shell design
-The use of high-brightness OLED liquid crystal display enables this series of products to be Used in various industrial occasions.
-Double-button design and user-friendly menu make the product more convenient to use.
-A variety of connection methods can fully meet various specific installation needs.
-The 330° rotatable display head guarantees the best results in different installations -High viscosity medium, strong anti-fouling ability
MD-LS380 series adopts capacitive principle sensor for liquid level measurement. The signal is processed by the rear processing circuit and converted into standard industrial electrical signal for output and display. The built-in electrode of the capacitive sensor generates a capacitance value with the metal tank or box, and the capacitance value changes with the increase and decrease of the medium in the cavity, thereby determining the liquid level value of the medium

Send email to us

Product Detail

Product Tags

Measurement range (guide rod length L):
100…1000mm (bottom dead zone≤20mm)
Measuring medium: liquid
Pressure resistance: 10bar
Media density: ≥0.3g/cm
Power supply voltage: 16…28Vdc
No-load current consumption: ≤30mA, when powered by 24Vdc
Switch output
Output type: PNP / NPN optional normally open normally closed can be set
Output current: <500mA
Voltage drop: <1V
Current type analog output
Output type: three-wire 0...20mA/4...20mA can be set
Load RA: RA≤500ohm
Linearity: ≤±1.5% of range
Voltage type analog output
Output type: three-wire 0...5V/1...5V can be set
Load RA: RA>10Kohm
Linearity: ≤±1.5% of range
Wiring protection: reverse phase, overload, short circuit protection
Display: OLED liquid crystal display
Temperature
Working temperature: -20…80ºC
Medium temperature: -20…100ºC
(high temperature type: -50…200ºC, higher temperature can be customized)
Storage temperature: -30…80ºC
Material
Shell: stainless steel 304
Probe rod: PTFE
Protection class: IP67
Outlet method: M12×1 connector directly attached