Meokon water flow meter irrigation water pipe electromagnetic flowmeter MD-EL

Short Description:

It can also be used to measure corrosive media as long as the proper pipe lining material and electrode material are selected. Solid particles in the medium will not affect the measurement results.

Send email to us

Product Detail

Product Tags

Product Description:

The electromagnetic flowmeter is suitable for measuring almost all electrically conductive liquids, as well as the flow measurement of mud, paste and mud. The premise is that the measured medium must have at least some minimum conductivity. Temperature, pressure, viscosity and density have no effect on the measurement results.

It can also be used to measure corrosive media as long as the proper pipe lining material and electrode material are selected. Solid particles in the medium will not affect the measurement results.

The flow sensor and the intelligent converter form a complete flow meter integrally or separately.

Technical characteristics:

No moving parts and no wear

The measurement range of the process is 1: 100

No clear section or flow enhancement device

Measuring the flow rate of various conductive liquids

Measurement results are not affected by physical properties such as temperature, pressure, viscosity, and density

Strong corrosion resistance and wear resistance

Measures forward / reverse flow

Large LCD screen, user-friendly operation interface, easy to use

Persistent EEPROM for saving configuration parameters and measurement data during power failure

Wide operation voltage range

Self-diagnosis

Application:

Clean water &sewage

Electricity production &distribution

Chemical & industrial pharmacy

Food industry

Specification:

Display	LCD display, display various flow data in real-time, m³ or L display unit
Structure	Embedded type design, integrated or split type
Measuring medium	Liquid or solid-liquid, Conductivity> 0.5μs / cm2
Measuring Range	0.05m/s~8m/s
Measurement Accuracy	Diameter mm	Range m/s	Accuracy
	3~20	0.3 or less	±0.25%FS
		0.3~1	±1.0%R
		1~10	±0.5%R
	25~600	0.1~0.3	±0.25%FS
		0.3~1	±0.5%R
		1~10	±0.3%R
	700~3000	0.3 or less	±0.25%FS
		0.3~1	±1.0%R
		1~10	±0.5%R
	%FS: relative range, %R: relative measurement
Caliber(mm)	6mm~2000mm
Nominal pressure	PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN420 etc.
Output	4~20mA or frequency (<5KHz), RS485, wireless transmission (optional), relay (option al)
Connection	DN6 ~ DN2000 for flange connection
Connection standard	Applicable to various pipe flange standards
Product Standards	Accuracy requirements meet JJG 1033-2007 standard
IP rating	IP65(integrated), IP67 or IP68 when split (optional)
Power supply	AC86~220V
Ambient temperature	5~55℃
Environment humidity	<85%r.h（Non-condensing）