Meokon Split Electromagnetic Flowmeter MD-EL-F
The MD-EL split electromagnetic flowmeter is suitable for measuring almost all electrically conductive liquids, as well as flow measurement of mud, paste and mud. The premise is that the measured medium must have at least a certain valley conductivity. Temperature, pressure, viscosity and density have no influence on the measurement results.
It can also be used to measure corrosive media as long as the appropriate pipeline lining material and electrical material are selected. The solid particles in the medium will not affect the measurement results.
The flow sensor and the intelligent converter form a complete flow meter integrally or separately.
Technical characteristics:
No moving parts, no wear
The measuring range of the process is 1:100
No clarification section or flow enhancement device
Used to measure the flow rate of various conductive liquids
The measurement result is not affected by physical characteristics such as temperature, pressure, viscosity and density
Strong corrosion resistance and abrasion resistance
Can measure forward/reverse flow
Large LCD screen, user-friendly operation interface, easy to use
Persistent EEPROM, used to save configuration parameters and measurement data when power is off
Wide operating voltage range
Self-diagnosis
Applications:
Clean water, sewage
Electricity production and distribution
Chemical and industrial pharmaceuticals
food industry
Specification:
Range |
0.05m/s~8m/s |
Acc. |
0.5% 0.2% |
Supply |
AC86~220V |
Caliber |
6mm~2000 mm |
Output |
4~20mA or frequency (<5 KHz), RS485, wireless transmission (optional), relay (optional) |
Display |
LCD display, real-time clock displays various flow data, optional m3 or L display unit |
Structure |
Embedded type design, split type |
Measuring medium |
Liquid or solid-liquid two-phase fluid, conductivity>0.5μs/cm2 |
Nominal pressure |
PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN420, etc. optional |
Connection |
DN6~DN2000 is flange connection |
Protection level |
IP65 |
Ambient temperature |
5~55℃ |
Environment humidity |
<85% r.h (non-condensing) |
Connection standard |
Applicable to various pipe flange standards |
Product Standards |
Accuracy requirements comply with JJG 1033-2007 standard |