Meokon MD-EL Customized Electromagnetic Flow Meter
The electromagnetic flowmeter is suitable for measuring almost all electrically conductive liquids, as well as the flow measurement of mud, paste and mud. The premise is that the measured medium must have at least some minimum conductivity. Temperature, pressure, viscosity and density have no effect on the measurement results.
It can also be used to measure corrosive media as long as the proper pipe lining material and electrode material are selected. Solid particles in the medium will not affect the measurement results.
The flow sensor and the intelligent converter form a complete flow meter integrally or separately.
Application:
Clean water &sewage
Electricity production &distribution
Chemical & industrial pharmacy
Food industry
Technical characteristics:
1. No moving parts and no wear
2. The measurement range of the process is 1: 100
3. No clear section or flow enhancement device
4. Measuring the flow rate of various conductive liquids
5. Measurement results are not affected by physical properties such as temperature, pressure, viscosity, and density
6. Strong corrosion resistance and wear resistance
7. Measures forward / reverse flow
8. Large LCD screen, user-friendly operation interface, easy to use
9. Persistent EEPROM for saving configuration parameters and measurement data during power failure
10. Wide operation voltage range
11. Self-diagnosis
Specification:
Display | LCD display, display various flow data in real-time, m³ or L display unit | ||
Structure | Embedded type design, integrated or split type | ||
Measuring medium | Liquid or solid-liquid, Conductivity> 0.5μs / cm2 | ||
Measuring Range | 0.05m/s~8m/s | ||
Measurement Accuracy | Diameter mm | Range m/s | Accuracy |
3~20 | 0.3 or less | ±0.25%FS | |
0.3~1 | ±1.0%R | ||
1~10 | ±0.5%R | ||
25~600 | 0.1~0.3 | ±0.25%FS | |
0.3~1 | ±0.5%R | ||
1~10 | ±0.3%R | ||
700~3000 | 0.3 or less | ±0.25%FS | |
0.3~1 | ±1.0%R | ||
1~10 | ±0.5%R | ||
%FS: relative range, %R: relative measurement | |||
Caliber(mm) | 6mm~2000mm | ||
Nominal pressure | PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN420 etc. | ||
Output | 4~20mA or frequency (<5KHz), RS485, wireless transmission (optional), relay (option al) |
||
Connection | DN6 ~ DN2000 for flange connection | ||
Connection standard | Applicable to various pipe flange standards | ||
Product Standards | Accuracy requirements meet JJG 1033-2007 standard | ||
IP rating | IP65(integrated), IP67 or IP68 when split (optional) | ||
Power supply | AC86~220V | ||
Ambient temperature | 5~55ºC | ||
Environment humidity | <85%r.h(Non-condensing) |