Meokon Hydraulic Pressure Gauge Comparator For Pressure Calibration

This gauge is a high-precision and intelligent digital pressure gauge. It has a high- precision sensor and display the pressure accurately in real time, equipped with a large size LCD. It has a various of features, such as zero clearing, backlight, on/off button, units, low voltage alarm. And it is convenient to install and easy to operate.

The surface and connector of the product is 304SS. It can be used to measure gas, liquid, oil and other non-corrosive mediums of stainless steel. It applies to these fields: portable pressure measurement, equipment supporting, equipment calibrations.

This gauge suit Non-corrosive Air/Hydraulic/Oil/Water pressure testing.

Specification:

Pressure Range: -15 PSI to +15 PSI;

Pressure Connection: NPT1/4;

Display Unit: Bar, PSI ,MPa, Kgf/cm2;

Overload Capacity: 150%;

Accuracy: 0.5%FS;

Long-term Stability: 0.5%FS/year;

Input Voltage: 3V (two 1.5V AAA batteries);

Working Temperature: -20C-70C;

Footer Material and Pressure Connection: 304 Stainless Steel;

Protection Class: IP65

Button Description:
Power button: press power button continuously for 3 seconds to Turn On or Turn Off;
UNIT button: shortly press Unit button to change the unit;
Long press “unit” button for 5 seconds, the display after the last reset
record maximum MAX;
Short press “unit” button, switch according to the minimum MIN.
Again short press “unit”,then quit the records show.
ZERO button: pressure Zero button continuously for 3 seconds for zero clearing;
LIGHT button: press Light button shortly to turn on or turn off the light,will be closed automatically after 70 seconds.