Integrated Electromagnetic Flow Meter MD-S451

Short Description:

◆ Measurements are not affected by fluid density, viscosity, temperature, pressure and conductivit.

◆ No obstacles in the measuring tube, no pressure loss, low requirements for straight pipe section.

◆ The LCD backlight type converter can be easily displayed and read in the sun or in a dark room.

◆ Flow meter with bidirectional measurement system, built-in three totalizers: positive total, reverse total and total difference.

◆ It has various forms of output: current 4-20mA, pulse, rs-485, HART.

◆ The converter has self-diagnosis alarm output, no-load detection alarm output, flow upper and lower limit alarm, batch control (need to be customized)

and other alarm output functions.

Send email to us

Product Detail

Product Tags

Magnetic flow meter is ideal for conductive liquids. It is composed of a sensor and an intelligent conversion part. Water flowmeter can measure the volume flow of various conductive liquids. The measured media include acid, alkali, salt and paper pulp, mud, waste water, sea water, and solid-liquid liquids. In addition, the sensor adopts an integral sealed structure, and the measuring tube and the shell are integrated, which is moisture-proof and waterproof, and is suitable for underground or humid environment installation.

TECH PARAMETERS

Applicable Medium	Various conductive liquids
Nominal Diameter	DN6-DN3000mm
Flow Direction	Two-way measurement
Repeatability Error	±0.1%
Accuracy	±0.5%FS
Signal output	Pulse, 4-20mA, RS485, Modbus protocol; Hart protocol (optional), Profibus DP (optional)
Relative humidity	5％-90％
Power supply	DC24V (20-36V)
Power supply	AC220V (85-250V)
Lining material	CR: -25-+60℃(wear-resisting)
	PU: -25-+80℃ (Strong resistance to wear and tear)
	PTFE: -25-+120℃ (Corrosion resistant)
	FPM: -25-+180℃ (High temperature resistant)
	F46: -25-+ 180℃ (Corrosion resistance; Resistant to high and negative pressure)
	PFA: -25-+ 180℃ (Corrosion resistance; Resistant to high and negative pressure)
Electrode material	316L (No corrosion/weak corrosion)
	HB (Resistant to non-oxidizing acid, alkali and salt)
	HC (Oxidation-resistant acid, alkali and salt)
	Ti (Chloride)
	Ta (Strong corrosion resistance)
	Pt (Apply to almost all chemicals except aqua regia and ammonium salts)
Nominal Pressure	DN50≤M4.0Mpa
	DN65-DN250≤l.6Mpa
	DN300-DN1000≤1.0Mpa
	DN1200-DN2000≤0.6Mpa
	Or other specified by order
Protection Grade	IP65; IP68

APPLICATION

1.Sewage flow measurement
2.Clean water circulating water measurement
3.Chemical liquid measurement
4.Mud and ore slury measurement
5.Printing and dyeing,electroplating,paper making, pharmaceutical.